DIY Dumbbell using "condemned" metals and determination.

3개월 전
in diy
Preamble

I love bodybuilding and as @rmsbodybuilding will tell you, it is not an easy feat. It always comes at a price; you have to prepare your mind and body.

There's only one reliable gym in my area and it is a chore to get there. Other than the #3000 monthly membership charge, I also have to transport myself there. This is why I had to find an alternative

My brother and fitness junkie @skiwzz gave me the idea that I could construct my own equipment by using metals from a junkyard and this led me to embark on this expedition.

The Journey

At about Noon today, I set out on this adventure that has been incubating for months. I resolved in my mind that I was not going back home without dumbbells today. All I had was #3,200 naira and pure grit.

I enquired from people around me about where I could get scrap metals and got referred to the local market. I spent over an hour walking around the market and the closest I saw to what I was looking for were Bicycle sprockets.

The plan was to assemble 20 of them; 10 on each side of a short rod, that ought to give me weight that's worth my time. Sadly, I could only find 4 sprockets in the entire market and in hindsight, I'm glad it went this way. Shop after shop, I enquired and they all gave me negative responses. A lot of people even discouraged me by talking down my chances of locating my target.

The Location

After nearly two hours under the scorching hot sun, ignoring all the funny looks I got when I went to shops and asked "please do you sell scrap metal?", I finally got a relevant lead that led me to a vehicle graveyard littered with auto repairmen.

My God the place is massive. There were all sorts of activities going on there and in hindsight, I should have taken a photo for you to get a clearer picture but I was overwhelmed by the scenary. Lets say it was like the Wallstreet for mechanics, the champions league for dead cars or the super bowl of greasy metals. It was huge.

Lost in Translation

The first challenge I faced was the language barrier. I'm relatively new in this part of the country, so I only speak the common tongue sparsely and that's putting it generously. I can say a few words at best and understand a few more. After roughly 30 minutes of trying to explain what I meant to bystanders with idle time to no avail, lady luck smiled on me by sending an acquintance that speaks Hausa(the common tongue) to help me get directions.

Scrap aint Cheap

I followed the direction and it led me to a spot that felt like it was at the very end of the world. Beyond the spot was a stream and trees... The first pieces of metal he brought were probably from a ship or something, they were massive I told him I wanted two and he quoted #15,000 Naira.

Well damn, I thought this was suppose to be a scrap yard. I found out the hard way that scrap metal comes at a cost. I schemed through his scrap inventory and found these sexy identical twin pieces of metal(Gearbox Pumps they were called). He quoted #3,000 for them but after a period of back and forth, my super haggling skill brought it down to #1,500 and a further #500 for a shaft.

The Pain

The next phase was to weld these pieces of metal into a dumbbell. All that requires, of course, is carrying these heavy pieces of metal for a measly 20-minute walk through greased mud, cow shit, hordes of people and under the scorching hot Sun.

I got to the welder with only #1,100 in my pocket. I explained what I wanted and he quoted #2,000 naira, I went into haggling mode once more and he caved in at #1,000(this was the maximum I could afford because the rest was for transort)

Sweet Victory

Welding was completed and I gathered the pieces of myself my self home. It is impossible to describe how stressful this was but you know what? I was covered in grease, sweat and aching all over,but the overwhelming feeling of pride in my achievemnt and happiness didn't let me feel the pain. Hell yeah, the sweet feeling of victory.

I actually thought I'd be too exhausted to do anything on getting home but adrenaline and excitement had other ideas. I took off my sweaty clothes, washed my face and hands and slipped into something else. I took my new baby to the tap, washed off all the grease and took her for a spin.

IMG20190928WA0019.jpg

Getting a standard dumbbell of this weight range would normally cost anywhere between #10,000-15,000 naira in a sport equipment shops, while on eBay, there was one for sale at $23 and that's without shipping fee. To put it into perspective, it costs me roughly $8 or #3,000 Naira..

I'm glad I set out on this adventure, I got back home with an empty pocket and heart filled with joy. I'm already planning towards getting bench weights, the bar and of course the bench itself. You'll be the first to hear all about it and hopefully, it won't be as tedious as this one.

So @steemmatt, You can clock me in for 100 reps of curls every day from now on for the fitness challenge, thank you for reading

So there you have it. You can also make something similar for yourself as well. Here's all you need;
Gearbox Pump x2
1m Shaft x1
Electrodes for Soldering x 4
100% Determination

Authors get paid when people like you upvote their post.
If you enjoyed what you read here, create your account today and start earning FREE STEEM!
STEEMKR.COM IS SPONSORED BY
ADVERTISEMENT
Sort Order:  trending

This post was shared in the Curation Collective Discord community for curators, and upvoted and resteemed by the @c-squared community account after manual review.
@c-squared runs a community witness. Please consider using one of your witness votes on us here

Well thats quite a journey for a dumbell. 😁
You actually gave me a good idea. Im looking to get 2 30kg dumbells and i really dont want to pay 200$.

·

Man $200 is too much. With as low as $50, you can sort it out. Just find a good metal scrap yard, scheme through it and you'll find what you're looking for.
Also, feel free to support my cause for the next set of weights 😁

Hey @belemo
Your post has been determined to be Splat-Worthy!!
Therefore You’ve been Splatted by the Splatz Curation Trail
A705B77C-E8CA-4B64-85B0-B6D2A965FBE9.gif
@jlsplatts original
Rewarding Your Original Work
With an Upvote
And
Resteem
If you find posts worthy of a nasty Splatin’ feel free and mention @splatz in your reply to their post. Call me out!!
SPLATZ info

Wow...... Like I say..... You were the one that brought me into the world of body building.... And I love your zeal... I really thought that you would be pre occupied with your workload and stuff and still yet you create time to work out... Am really impressed... Very creative mind.

·

Thanks Nengi. Really nice to see you here. Well I'm glad I motivated you. Keep up the good work bro.

·
·

Wow, hey! Great post!! Good to meet you guys! And again, welcome to Steem @nengirazzy1!

Wow, this simply amazing putting scrap together to bring out your workout equipment.

You bargain well sha

·

Haha thanks bros. It wasn't easy I tell you. My body still dey pain me now

Hey! That's awesome what you did! And it's awesome how you tell about it! You can easily jump on the #ecotrain

·

Thanks. I'll include the tag.

the cool stuff! A very superb idea to scrap metal to make a dumbell and other gym equipment. Respect! no pain no gain!!!

·

Thanks bro. We do what we must.

Way to go @belemo!! That is using all your wit and skills and making it work...WOW, much respect to you. You must have some awesome haggling skills as well LOL.

·

Lol I'm usually not so good at it but I think today I got lucky.

·
·

hahaa...maybe you're just getting better! Keep practicing and soon they'll be paying you to take it off their hands :D

·
·
·

Lol man that would be the day. I'll be tony Montana of haggling

Wait, recycling & fitness at the same time? This is just AWESOME. Save up some more and maybe you can forge your own iron kettlebell. Great stuff!

·

Yup. That's the plan. One equipment at a time.

nice, good idea in providing your hobbies. Imagine from scrap then you made it useful. Salute my friend..
thank you for sharing at #pypt server

Posted using Partiko Android

·

Thanks bro

So resourceful! Repurposing stuff is very important. I saw this on PYPT

·

Yup yup. Recycling is the way forward

Nice use of scrapped materials... You have created awesome stuff and you have created a great post about it! Waiting for future recycled things... Wish you luck!

Saw this on #PYPT

Thanks for sharing your experience with us!
TIBLogo

You have been curated by @thekittygirl on behalf of Inner Blocks: a community encouraging first hand content, with each individual living their best life, and being responsible for their own well being. #innerblocks Check it out at @innerblocks for the latest information and community updates, or to show your support via delegation.

They say,

Necessity is the mother of invention

It seems that you have found a use for all of that old scrap to improve your life and strength! Good stuff! repurposing is a great thing, plus buying professional weights I am sure are expensive. Thank you for sharing your post in PYPT today. Have a great week!

·

Yup buying weights is very expensive. Thanks for coming around Sarge

·
·

Yup buying weights is
Very expensive. Thanks for
Coming around Sarge

                 - belemo


I'm a bot. I detect haiku.