New FPV racing drone build - light build, stretched frame

4년 전

I'm starting to build a new FPV racing drone that is light, fast and agile. Well, I'm using some used parts, so I guess it's not 100% new... Technicalities aside, The flight controller is new, the 4in1 ESC is new, the VTX (still waiting for it to arrive) is new and the frame is new.

01.jpg

The frame is a clone from the Mode2 Ghost. It's actually called Hantu 5 and I bought it really cheap at Banggood. The dimensions all seem correct and the carbon is cut correctly, with the exception of the top plate that is cut diagonally but I don't foresee any problems. The original Mode2 Ghost is an evolution of the Pyrodrone Hyperlite Floss 5" and this clone actually feels more rigid than the original Floss. Carbon seems of acceptable quality and being that the bottom plate and arms are cut correctly (demonstrated by the general stiffness of this skinny frame), at 18€ it was a good deal. Of course at this price, it doesn't include the titanium screws nor the aluminum nuts from the original Ghost. As with most of the frames, even the expensive ones, I sanded down the edges of the carbon and I'll seal them with superglue.

02.jpg

The included FPV camera mount and VTX antenna mount are right at home in the trash can. XD Instead of TPU, they are made of 3D printed hard plastic. I don't care about the VTX antenna mount and for the FPV camera, I'll just use some TPU mounts I have laying around. The screws, well, they are so short that they barely thread on the included nuts and posts. I'm already used to bad hardware on these cheap frames and I replaced all the screws used on the bottom plate with quality ones and of the right length. In fact, taking inspiration from the original Ghost and my Floss build, I used aluminum nuts to loose some weight (minimal), but mainly to better secure the arms and increase the clearance between the bottom and top plate, just like the original Ghost.

03.jpg

Together with this frame, I ordered an Omnibus F4 AIO (also from Banggood, of course). Although I believe the original Omnibus FCs are made by Airbot, many other manufactures use the same layout/design for their boards, as this allows the use of the same firmware as the original ones. This AIO FC is in fact much alike the DYS F4 PRO AIO Flight controller, with some subtle differences, and the DYS one also uses the Omnibus firmware. If my AIO FC has the same durability (or close) and performance of the branded ones, at 18€ it's a bargain.

04.JPG

The 4in1 ESC is an original Airbot Typhoon32 V1.1. I got a very good deal on this one, as it's still a little bit expensive even though the V2 is already out. Good ESCs are essential for reliable top performance and I'm glad I got this deal, as I feel much safer using high quality branded ESCs.

05.jpg
06.jpg

I'm waiting on a Team Black Sheep (TBS) Unify pro HV Race VTX, as I had a non Race version that lasted me for about a year and a half, taking a lot of abuse and performing solid until now. These are top quality, with no bleeding frequencies when in use. Every time I connect my drone, no one ever complained about glitches or interference with their VTX frequencies. Some organizations only allow certain VTXs because of this and the Unify is one of those that is always allowed. Plus, the ability to use smart audio to quickly change my VTX frequency through the OSD is a feature that I no longer can live without, as it is so easy, quick and convenient. I'll be using a whip antenna to save some weight, as these are usually enough to get a decent video feed.

07.jpg

Besides all this, I'll be using my Cobra CPL2205 2500KV motors, my RunCam Micro Swift 2 and my trusty FlySky X6B radio receiver.

08.jpg
09.jpg
10.JPG

When the build is complete I'll post some pictures. This one will be my main racing drone from now on, as I wish to test if using a frame with a more stretched geometry makes any difference in its performance and behavior. I still love my Floss though and eventually it will get some new parts too, so it can always be ready to be used as a backup at any race. Cheers guys and gals and fly safe! ^^

11.jpg

Links

HANTU 5 Inch 210mm Carbon Fiber Frame
Omnibus F4 Flight Controller AIO
Airbot Typhoon32 V1.1
TBS UNIFY PRO 5G8 HV - RACE (SMA)
Cobra CPL2205 2205 2500KV
RunCam Micro Swift 2
FlySky X6B

If you liked this, please upvote, comment, follow and subscribe my YouTube channel: https://www.youtube.com/user/besg666/videos
Get More Upvotes by SteemFollower! Please use this referral link and help me out. Thanks! https://steemfollower.com/?r=6423
Authors get paid when people like you upvote their post.
If you enjoyed what you read here, create your account today and start earning FREE STEEM!
STEEMKR.COM IS SPONSORED BY
ADVERTISEMENT
Sort Order:  trending

You got a 5.82% upvote from @minnowvotes courtesy of @madviking!

This post has received a 7.14% upvote from @msp-bidbot thanks to: @madviking. Delegate SP to this public bot and get paid daily: 50SP, 100SP, 250SP, 500SP, 1000SP, 5000SP Don't delegate so much that you have less than 50SP left on your account.

You got a 1.36% upvote from @emperorofnaps courtesy of @madviking!

Want to promote your posts too? Send 0.05+ SBD or STEEM to @emperorofnaps to receive a share of a full upvote every 2.4 hours...Then go relax and take a nap!

sneaky-ninja-sword-xs.jpg

Sneaky Ninja Attack! You have just been defended with a 3.26% upvote!
I was summoned by @madviking. I have done their bidding and now I will vanish...


woosh

A portion of the proceeds from your bid was used in support of youarehope and tarc.


Abuse Policy
Rules
How to use Sneaky Ninja
How it works
Victim of grumpycat?

You got a 2.90% upvote from @upmewhale courtesy of @madviking!

Earn 100% earning payout by delegating SP to @upmewhale. Visit http://www.upmewhale.com for details!

You got a 5.32% upvote from @brupvoter courtesy of @madviking!

Congratulations, your post received 16.52% up vote form @spydo courtesy of @madviking! I hope, my gratitude will help you getting more visibility.
You can also earn by making delegation. Click here to delegate to @spydo and earn 95% daily reward payout! Follow this link to know more about delegation benefits.

Release the Kraken! You got a 9.59% upvote from @seakraken courtesy of @madviking!

You got a 6.03% upvote from @dailyupvotes courtesy of @madviking!

Please upvote this comment to support the service.

This post has received a 5.10% upvote from @aksdwi thanks to: @madviking.

This post has received a 9.54% upvote from @lovejuice thanks to @madviking. They love you, so does Aggroed. Please be sure to vote for Witnesses at https://steemit.com/~witnesses.

You got upvoted from @adriatik bot! Thank you to you for using our service. We really hope this will hope to promote your quality content!

This post has received a 1.71 % upvote from @booster thanks to: @madviking.