In this week's video, I talk about using a faceplate instead of a chuck for holding the piece that I'm working on. The faceplate can be used to hold objects that are too large to hold in the 3 inch chuck that comes on the lathe. Since I'm working on 4 inch diameter pieces, I would need a 5 inch chuck to hold the piece, and that would require the outside clamping jaws to be installed in the chuck. The faceplate will hold things that are larger than 4 inches, I think 5 inches is about the maximum size for this faceplate. The faceplate can also hold odd shaped pieces, or hold a piece off center for certain jobs.
Here is the video.
Thanks for stopping by to check out my video! I hope you find it interesting!
![steeming on.jpg](UPLOAD FAILED)