VECO Masternode Setup Guide

2년 전

=========================================
Important
=========================================
Before you begin please ensure that you have the following:

  • 1,000 Veco (VECO) coins
  • The latest VECO wallet
  • A dedicated VPS server for hosting your Motify masternode.

=========================================
After making sure you have the items above, continue
=========================================

=========================================
[1] Local Wallet configuration
=========================================

Open your local wallet and complete the following from the menu:
Settings > Options> Wallet > Enable Coin Control

Create A Masternode Address
Go to Tools > Debug Console > and enter (without quotes)

‘ getaccountaddress mn1 ‘. Copy the outputted address (this is your masternode public address)

=========================================
[2] Fund the Masternode.
=========================================

Send EXACTLY 1,000 VECO to your masternode public address.
*Before proceeding, wait for all necessary confirmations or you will have to redo the process again

=========================================
[3]  Masternode TX data
=========================================

Go to Tools > Debug Console > and enter (without quotes)

‘masternode genkey’ (this is your private key)

‘masternode outputs’ (this is the tx data of your masternode)

(Note these details)

===========================================
[4] VPS Configuration
===========================================

(if you do not already have a VPS, I strongly advise you to: https://www.vultr.com/?ref=7372218 )

You may use any VPS hosting & SSH client you choose to do this.

Open SSH Client using the provided username and password.

=========================================
[5] Download dependencies
=========================================

sudo apt-get install software-properties-common
sudo apt-get install unzip
sudo add-apt-repository ppa:bitcoin/bitcoin
sudo apt-get update
sudo apt-get install libdb4.8-dev libdb4.8++-dev
sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils
sudo apt-get install libboost-all-dev
sudo apt install libminiupnpc-dev
sudo apt-get install libzmq3-dev
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler
sudo apt-get install libqrencode-dev

download wallet

wget https://github.com/VecoOfficial/Veco/releases/download/v1.0.0/vecoCore-1.0.0-linux64-cli.Ubuntu16.04.tar.gz
tar zxf vecoCore-1.0.0-linux64-cli.Ubuntu16.04.tar.gz
=========================================
[6] Launch Daemon
=========================================

chmod 777 ./vecod
./vecod -daemon
killall ./vecod
sudo nano /root/.vecocore/veco.conf

as a good alternative, is to use the commands below to make all the work easier
mv ./vecod /usr/bin/
mv ./veco-cli /usr/bin/

=> Copy/Paste the following and insert your information accordingly

rpcuser=(choose a user name)
rpcpassword=(choose a Password)
rpcallowip=127.0.0.1
server=1
listen=1
daemon=1
logtimestamps=1
maxconnections=256
masternode=1
masternodeprivkey=(Enter Masternode Genkey from Step 3)
Press CTRL + X > Y > Enter> Enter

======================================
[7] Local wallet veco.conf configuration
======================================

maxconnections=256
gen=1
genproclimit=0
server=1
dns=1
listen=1
daemon=1
rpcallowip=127.0.0.1
logtimestamps=1

=========================================
[8] Local Wallet masternode.conf configuration
=========================================

In the top bar of your local wallet find Tools > Open Masternode configuration file and insert you’re information on the line below DO NOT INCLUDE BRACKETS

mn1 {IP}:{Port} {masternodeprivkey} {collateral_output_txid} {collateral_output_index}
(Exemple:)

========================================
[10] VPS wallet
========================================

./vecod -daemon
chmod 777 ./veco-cli
./veco-cli getinfo

or

vecod -daemon
chmod 777 ./veco-cli
veco-cli getinfo

==========================================
[11] Restart Local Wallet
==========================================

Close wallet

Re-open wallet, in the top bar click the masternodes tab > click on the masternode that appears > click Start Alias

===========================================
[12] Get back on the VPS
===========================================

./veco-cli startmasternode local false
./veco-cli masternode status
Retry until the out appears as

or

veco-cli startmasternode local false
veco-cli masternode status
Retry until the out appears as

=========================================
You should receive a message similar to this one.
=========================================

{
“txhash” : “39434949384384938ffjjgj398439497497gjg98434”,
“outputidx” : 1,
“netaddr” : “45.11.111.111:44741”,
“addr” : “Mtots48d8d7fsjd9s7ds9dfF8fGfre”,
“status” : 4,
“message” : “Masternode successfully started”
}

=======================================
Congratulations, you have completed a clean installation of masternode, now just wait until your payments fall into your wallet!

Address Veco:. VKdxfG8m7edoVQVFadKMCurdntxrLKwUGJ
I'll be happy to buy a pizza with your donation

Authors get paid when people like you upvote their post.
If you enjoyed what you read here, create your account today and start earning FREE STEEM!
STEEMKR.COM IS SPONSORED BY
ADVERTISEMENT